Paradyne CSU, DSU, 9126-II, 9128-II manual Verifying Domains and Groups, 10-5

10. Setting Up NetScout Manager Plus for FrameSaver Devices

Verifying Domains and Groups

Procedure

1.From the NetScout Manager Plus main window, with the FrameRelay and Admin radio buttons still selected, click on the Config Manager icon to open the Configuration Manager main window.

2.Verify that only FrameSaver SLV-supported domains appear listed in the Domain column. FrameSaver SLV-supported domains include:

—	ATALK	—	IPX	—	RMON
—	DECNET	—	NETB	—	SNA
—	IP	—	NET~	—	VINES
—	IPV6	—	OSI	—	NEWVINES

3.Verify that:

—S (statistics collection) appears for each domain listed in the Group column.

—H (hosts) appears for the IP domain only.

—Dashes occupy all other positions under the Group column.

—Zeros appear under the Samples and Interval SH and LH columns.

—Dashes appear under all Logging columns: Stat, Host, Conv.

4.If all these requirements are met, no further action is required. Close the Configuration Manager window.

If all these requirements are not met, a FrameSaver SLV-supported domain needs to be added, or if an unsupported domain needs to be deleted, the Properties File must be edited.

9128-A2-GB20-80 September 2002 10-5