Paradyne CSU, DSU, 9126-II, 9128-II manual Code Point Definitions, Code Pnt, Name

4. Configuration Options

Code Point Definitions

Select Class of Service Definitions from the System menu, then PgDn or PgUp, to display or change the Code Point definitions for a Class of Service ID. See Configuring Class of Service Definitions on page 4-25for instructions.

Table 4-3. Code Point Definitions

Code Pnt

Possible Settings: 000000–111111

Default Setting: None.

This read-only field shows the possible Code Points. Code Points are described in

RFC 2474.

ID

Possible Settings: 1–7

Default Setting: 1

This read-only field shows the ID associated with the Name field. If you change a name in a Name field on this screen and select Save, the ID changes to match the name.

Name

Possible Settings: ASCII Text

Default Setting: Default

The Name field specifies the Class of Service to which you want to assign the Code Point.

ASCII Text – Specifies one of the Class of Service Names entered on the Class of

Service Definitions screen.

9128-A2-GB20-80 September 2002 4-27