Paradyne CSU, DSU, 9126-II, 9128-II manual Access Control and System Level Command Summary

D. Router Command Line Summaries and Shortcuts

Access Control and System Level Command Summary

Table D-2, Access Control and System Level Commands, lists of all of the access control and system level commands for the CLI.

Table D-2. Access Control and System Level Commands

Command	Function
?	Displays all valid commands for the current
	access level.
!	Used to enter comments. Comments following
	the ! are ignored by the CLI.
configure {terminalfactory)	Enters configuration mode so configuration
	options can be edited.
disable	Exits Administrator access level.
enable	Enters/enables the Administrator access level.
enable password password	Sets or disables the password level. Default is
no enable password [ password ]	None.
end	Leaves configuration mode to return to
	standard operating mode.
exit	Leaves the current configuration level or
	terminates the session. It may be necessary to
	enter the exit command several times when
	leaving configuration mode.
help	Displays a summary of help options.
[no] pager	Enables/Outputs up to 23 lines.
reload	Resets the router and reloads its configuration.
save	Saves changes to the router’s configuration.

9128-A2-GB20-80 September 2002 D-3