Paradyne CSU, DSU, 9126-II, 9128-II Configuring Telnet and/or FTP Session Support, Name 2 Access

4. Configuration Options

Table 4-19. General SNMP Management Options (2 of 2)

Name 2 Access

Possible Settings: Read, Read/Write

Default Setting: Read

Specifies the type of access allowed to the objects in the MIB. This is the type of access allowed for external SNMP managers accessing MIB objects using Community Name 2.

Read – Allows read-only access (SNMP Get command). This includes all objects specified as either read-only or read/write in the MIB RFCs.

Read/Write – Allows read and write access (SNMP get and set commands).

Configuring Telnet and/or FTP Session Support

elnet and FTP options control whether a Telnet or FTP (File Transport Protocol) session is allowed through an interconnected IP network and the access security applicable to the session. Two Telnet sessions can be active at a time (see

able 4-20, Telnet and FTP Session Options).

Main Menu → Configuration → Management and Communication →

Telnet and FTP Session

When a TS Access Management Link has been set up and activated, the following options have no effect upon the PVC:

Telnet Login Required

TSession Access Level FTP Login Required

4-84 September 2002 9128-A2-GB20-80