7. Operation and Maintenance

Table 7-8. Health and Status Messages (3 of 7)

Message

What It Indicates

 

 

ISDN Link Profile Disabled

An ISDN backup call could not be made because the

ISDN Link Name

ISDN link profile specified Link Name is disabled

 

(Main MenuConfigurationISDN

 

Link Profiles).

 

 

ISDN Link Profile Invalid,

No phone numbers have been specified in the ISDN

ISDN Link Name

link profile (specified by ISDN Link Name).

 

 

ISDN Network Failed (Active/Idle)

An ISDN network failure was detected when:

 

TActive – Backup call was in progress.

 

Idle – DBM was in Idle mode.

 

 

LatExceedIP_ Address,

An IP SLV Latency Threshold has been exceeded for

COSx,DLCInnnn1

the specified COS of the path. IP_Address is the IP

 

address of the path endpoint, COSx is the Class of

 

Service ID associated with the path, and nnnn is the

 

DLCI which contains the path.

 

 

Link Down Administratively, frame

he specified frame relay link has been disabled by

relay link 2

the unit due to LMI Behavior conditions or LMI

 

Protocol on another link is in a failed state.

 

 

Link Profile Disabled,

An ISDN backup call could not be made because the

ISDN Link Name

specified link profile was disabled.

 

 

LLB Active, [Interface]

A network Line Loopback (LLB) is active on the

 

specified interface.

 

 

LMI Discovery in Progress, frame

Local Management Interface protocol discovery is in

relay link 2

progress to determine which protocol will be used on

 

the specified frame relay link.

 

 

LMI Down, frame relay link 2

he Local Management Interface(s) has been

 

declared down for the specified frame relay link.

 

For an individual ISDN link, the message appears

 

Twhen LMI has been declared down on the link.

 

For a multilink aggregate link, the message

 

appears when LMI has been declared down on all

 

constituent links of the frame relay multilink.

 

 

LOS at DSX-1

A Loss of Signal (LOS) condition is detected on the

 

DSX-1 interface. Clears when the ratio of ones to

 

zeros received is greater than or equal to 12.5%.

 

Possible reasons include:

 

TDSX-1 cable problem.

 

No signal being transmitted from the DTE.

 

 

1nnnn indicates a DLCI number of 16 through 1007.

2frame relay link is one of the following:

Net1-FR1. The frame relay link specified for the network interface, Network 1.

Port-n. The frame relay link associated with the user data port.

ISDN Link Name on a non-network ISDN DBM interface.

3Does not apply to a TS Management Link DLCI.

7-22

September 2002

9128-A2-GB20-80

Page 204
Image 204
Paradyne CSU, DSU, 9126-II, 9128-II manual Health and Status Messages 3 What It Indicates