Paradyne 9128-II, CSU, DSU, 9126-II manual Show Command Summary, Table D-1. Show Commands Function

D. Router Command Line Summaries and Shortcuts

Show Command Summary

Table D-1, Show Commands, lists all of the show, or display, commands for the

CLI.

Table D-1. Show Commands

Command	Function
show arp	Displays all the devices in the router’s ARP
	table.
show bridge	Displays the router’s bridge forwarding
	database entries.
show configuration	Displays the router’s current configuration.
show configuration {savedunsaved}	Shows the current configuration, either saved in
	memory or entered during the current session.
show frame-relay map	Shows the status of all frame relay DLCIs on
	the router’s frame relay interface.
show interface	Shows the status of the specified interface,
[ intf-type intf-num [ .sub-intf-num ] ]	sub-interface, or all interfaces and
	sub-interfaces for the router.
show ip dhcp binding [ip-address]	Shows the address bindings associated with
	the DHCP server.
	If an IP address is specified, only bindings
	Tfor that client will be displayed.
	If no IP address is specified, all DHCP
	server bindings are displayed.
show ip nat translations	Displays all the address bindings associated
	with the DHCP server.
show ip route [ip-address]	Shows the Routing Table entry for the device
	with the specified IP address, or all Routing
	Table entries if no IP address is specified.
show ip traffic	Shows IP statistics for the router.
show spanning-tree	Displays the router’s spanning-tree topology.

D-2 September 2002 9128-A2-GB20-80