Paradyne 9126-II, CSU, DSU, 9128-II manual PVC Connection Status 2 Field, Status What It Indicates

7. Operation and Maintenance

Table 7-12. PVC Connection Status (2 of 2)

Field

Status

Status	What It Indicates
	Identifies whether the physical
	interfaces, LMIs, and DLCIs are all
	enabled and active for this PVC
	connection.
Active *	The PVC is currently active.
Inactive	TThe PVC is inactive because:
	– Alarm conditions and network
	and SLV communication
	status indicate that data
	cannot be successfully
	passed.
	– The unit has disabled the
	interface or frame relay link
	due to internal operating
	conventions.
	– Activation of an alternate
	virtual circuit is not warranted;
	that is, no alarm condition on
	the primary destination link
	has been detected.
Disabled	TThe PVC cannot be activated and
	is essentially disabled as a result
	of how the unit was configured.
	Possible causes:
	– The physical interface at one
	or both ends of the PVC is/are
	disabled.
	– The frame relay link on one or
	both ends of the PVC is/are
	disabled.
Invalid	TSome portion of the PVC
	connection is not fully configured.

* For the circuit to be active, both Source and Destination Statuses must be Active.

9128-A2-GB20-80 September 2002 7-35