8. Troubleshooting

Table 8-5. Ping Options (3 of 3)

Response Timeout

Available Settings: 1–60

Default Setting: 2

Specifies the amount of time, in seconds, to wait before a host that has not responded to a ping is declared unreachable.

1–60– The response timeout period.

When the ping has completed normally, timed out, or been stopped using the Stop command, informational fields are displayed as shown in Table 8-6, Ping Responses.

Table 8-6. Ping Responses

Field

Possible Values

Description

 

 

 

Status

In Progress

Ping has been sent.

 

Alive

Ping was successful.

 

Destination

The host could not be reached. See

 

Unreachable

RFC 792 for possible causes.

 

TPing Timed Out

There was no response in the period

 

 

Tspecified in Response Timeout.

 

No route in this

The IP address is not in the routing

 

device

table, and no Default IP Destination is

 

 

configured.

 

 

 

Ping Loss Ratio (%)

0–100

he ratio of pings received to pings

 

 

transmitted.

 

 

 

Pings Transmitted

1–999999

he number of pings transmitted.

 

 

 

Pings Received

1–999999

he number of pings received.

 

 

 

Pings Lost

1–999999

he number of pings transmitted less the

 

 

number of pings received.

 

 

 

Current Roundtrip

0

No measurement exists.

Delay

1–9999

The time in milliseconds that it took to

 

 

 

complete the latest ping.

 

 

 

Minimum Roundtrip

0

No measurement exists.

Delay

1–9999

The least time in milliseconds that it

 

 

 

took to complete a ping during this test.

 

 

 

Maximum Roundtrip

0

No measurement exists.

Delay

1–9999

The most time in milliseconds that it

 

 

 

took to complete a ping during this test.

 

 

 

Average Roundtrip

T0

TNo measurement exists.

Delay

1–9999

The average time in milliseconds that it

 

 

 

took to complete a ping during this test.

 

 

 

8-38

September 2002

9128-A2-GB20-80

Page 302
Image 302
Paradyne 9128-II, CSU, DSU, 9126-II manual Ping Options 3, Ping Responses Field Possible Values Description, Response Timeout