Paradyne 9126-II manual Purpose and Intended Audience, Document Organization, Section Description

About This Guide

Purpose and Intended Audience

This document contains information needed to properly set up, configure, and verify operation of the FrameSaver SLV (Service Level Verifier) 9126, 9126-II, and 9128-II CSU/DSU, and 9126-II Router running firmware release 2.0.3 or above. It is intended for system designers, engineers, administrators, and operators.

You must be familiar with the functional operation of digital data communications equipment and frame relay networks.

Document Organization

Section	Description
Chapter 1, About the FrameSaver	Identifies how the FrameSaver SLV 9126, 9126-II,
SLV	and 9128-II CSU/DSU, and 9126-II Router, fit into
	Paradyne’s Service Level Management (SLM)
	solution, and describes their features.
Chapter 2, User Interface and	Shows how to navigate the menu-driven user
Basic Operation	interface.
Chapter 3, Configuration	Shows how to access and save configuration options.
Procedures
Chapter 4, Configuration Options	Provides configuration information for the
	FrameSaver SLV 9126, 9126-II, and 9128-II
	CSU/DSU, and 9126-II Router.
Chapter 5, Configuring the	Describes the router’s interfaces and features, and
FrameSaver SLV Router	shows typical setups and configurations.
Chapter 6, Security and Logins	Provides procedures for controlling access to the
	FrameSaver SLV and setting up logins.
Chapter 7, Operation and	Provides procedures to display unit identification
Maintenance	information and perform file transfers, as well as how
	to display and interpret status and statistical
	information.
Chapter 8, Troubleshooting	Provides device problem resolution, alarm, and other
	information, as well as troubleshooting and test
	procedures.

9128-A2-GB20-80 September 2002 xi