Paradyne 9128-II, CSU, DSU Creating a Login, Main Menu → Control→ Administer Logins, Field Enter

6. Security and Logins

Creating a Login

A login is required if security is enabled. Security is enabled by the configuration options Login Required for the communication port, modem port, and Telnet Login Required or FTP Login Required for a Telnet or FTP Session.

Up to six login ID/password combinations can be created using ASCII text, and each login must have a specified access level. Logins must be unique and they are case-sensitive.

Procedure

To create a login record:

1. Select Administer Logins.

Main Menu → Control→ Administer Logins

2. Select New, and set the following configuration options, as appropriate.

In the field . . .	Enter the . . .
Login ID	ID of 1 to 10 characters.
Password	Password from 1 to 10 characters.
Re-enter password	Password again to verify that you entered the correct
	password into the device.
Access Level	Access level: 1, 2, or 3.
	Level-1 – User can add, change, and display
	configuration options, save, and perform device
	testing.
	Level-2 – User can monitor and perform
	diagnostics, display status and configuration option
	Tinformation.
	Level-3 – User can only monitor and display status
	and configuration screens.
	CAUTION: Make sure at least one login is set up for
	Level-1 access or you may be inadvertently locked out.

NOTE:

See Resetting the Unit and Restoring Communication in Chapter 8,

Troubleshooting, should you be locked out inadvertently.

3.Save your changes.

When Save is complete, the cursor is repositioned at the Login ID field, ready for another entry.

See Configuring SNMP NMS Security in Chapter 4, Configuration Options, for more information about security configuration options.

6-12 September 2002 9128-A2-GB20-80