Paradyne 9126-II Assigning DSX-1 Time Slots to the Network Interface, Time Slot Assignment Rule

4. Configuration Options

Time Slot Assignment Rule:

Valid network time slots are either Available or contain a Frame Relay Link 1 assignment.

Procedure

1. Follow this menu selection sequence:

Main Menu → Configuration → Time Slot Assignment →

Frame Relay Network Assignments

The Frame Relay Network Assignments screen appears. This screen contains a matrix of the current assignment status of all time slots on the network interface.

2.Enable or disable Time Slot Discovery.

—When enabled, the unit examines all time slots not cross-connected to other ports to determine which time slots are being used by the network for frame relay traffic. These time slots are set to FrameRly1. This is the factory default.

—When disabled, time slot assignments must be manually configured.

3.If Time Slot Discovery is disabled, assign network time slots for use by frame relay service, link 1, by typing FrameRly1 in the selected Network field.

4.Repeat Step 3 until all desired time slots are assigned.

5.Save the configuration.

Assigning DSX-1 Time Slots to the Network Interface

DSX-1 time slots are assigned by channel allocation, where you specify individual time slots. The DSX-1 interface must be enabled to assign DSX-1 time slots to the network interface (see Table 4-8,DSX-1 Physical Interface Options).

Value	Meaning
Ntt	It represents time slot tt of the selected network interface.
Assigned	The time slot is already assigned to something other than a DSX-1
	time slot, so it is unavailable. Assigned time slots cannot be modified
	from this screen.
Available	The time slot is currently unassigned.
DSX-1/tt	Slot tt of the DSX-1 interface is assigned to the network interface
	time slot identified right above it (Ntt).

9128-A2-GB20-80 September 2002 4-53