Paradyne 9126-II, CSU, DSU, 9128-II manual Entering System Information and Setting the System Clock

4. Configuration Options

Entering System Information and Setting the System Clock

Select System Information to set up or display the general SNMP name for the unit, its location, and a contact for the unit, as well as to set the system clock.

Main Menu → Control→ System Information

The following information is available for viewing. Save any entries or changes.

If the selection is . . .	Enter the . . .
Device Name	Unique name for device identification of up to 20 characters.
System Name	SNMP system name; can be up to 255 characters.
System Location	System’s physical location; can be up to 255 characters.
System Contact	Name and how to contact the system person; can be up to
	255 characters.
Date	Current date in the month/day/year format (mm/dd/yyyy).
Time	Current time in the hours:minutes format (hh:mm).

NOTE:

To clear existing information, place the cursor in the Clear field (Tab to the

Clear field) and press Enter.

See Chapter 6, Security and Logins, to set up and administer logins.

9128-A2-GB20-80 September 2002 4-5