Paradyne 9126-II, CSU, DSU, 9128-II manual Service Definitions in , Configuration Options, Cos Id

7. Operation and Maintenance

For an IP Enabled DLCI, statistics are shown for last, minimum, average, and maximum round trips, and for dropped SLV responses, for each of the seven classes of service.

Table 7-17. SLV Performance Statistics for IP Enabled DLCI (1 of 2)

Statistic	What It Indicates
Far End IP Addr	IP Address of the device at the other end of the DLCI
	connection.
	None appears if the FrameSaver unit has not communicated
	with the other end, or if the device at the other end of the DLCI
	does not have an IP Address configured.
Path Up Time	The number of days, hours, minutes, and seconds since the last
	transition of this DLCI from Inactive to Active.
Far End Circuit	Number of the DLCI at the other end of the connection.
	None appears if the unit has not communicated with the other
	end.
SLM Poll Type	The role played by the far-end FrameSaver in the collection of
	latency and availability statistics.
	Initiator – The far-end FrameSaver initiates the SLV packet
	used for statistics collection.
	Responder – The far-end FrameSaver returns the SLV packet
	sent by the Initiator.
Far End Name	The system name configured for the far-end FrameSaver
	device, obtained using its IP address. Unknown appears if the
	far end device is not a FrameSaver or if no response has been
	received since the last reset.
COS Type	The number of SLV packets received that indicate a mismatch
Mismatches	between the Class of Service definitions in the near-end and
	far-end devices.
Far End Type	The model type of the far-end FrameSaver device, obtained
	using its IP address. Unknown appears if the far end device is
	not a FrameSaver or if no response has been received since the
	last reset.
COS Name	The names for different Classes of Service defined using the
	Class of Service Definitions screen. See Configuring Class of
	Service Definitions in Chapter 4, Configuration Options.
COS ID	The ID numbers (1–7) of the Class of Service definitions.
Last RdTrip	Current round trip latency, measured in milliseconds, between
	the FrameSaver unit and the device at the other end of the DLCI
	connection.
	Unknown appears if communication with the far-end device is
	not successful.
Min RdTrip	Minimum round trip latency measured over the last 15 samples
	between the FrameSaver unit and the device at the other end of
	the DLCI connection.
	“--”appears if communication with the far-end device over the
	last 15 samples has not been successful.

9128-A2-GB20-80 September 2002 7-55