Paradyne 9128-II DSX-1 to Network Time Slot Assignment Screen Example, Ime Slot Assignment Rules

4. Configuration Options

DSX-1 to Network Time Slot Assignment Screen Example (Page 1)

main/config/tslot_assign/dsx							9128-II
Device Name: Node A						5/26/1999 23:32
		DSX-1	TO NETWORK 1 ASSIGNMENTS				Page 1 of 2
N01	N02	N03	N04	N05	N06	N07	N08
DSX-1/01 DSX-1/02 DSX-1/03			DSX-1/04 Assigned Assigned			Assigned	Assigned
N09	N10	N11	N12	N13	N14	N15	N16
DSX-1/09 DSX-1/01 Available			Available Available Available Available Available
N17	N18	N19	N20	N21	N22	N23	N24
Available Available Available			Available Available Available Available Available

--------------------------------------------------------------------------------

Ctrl-a to access these functions, ESC for previous menu			MainMenu Exit
Save	PgDn PgUp	ClearAll	FrAssign

Page 2 of 2 is for defining signaling assignments and trunk conditioning for each DSX-1 interface time slot. See DSX-1 Signaling Assignments and Trunk Conditioning (Page 2) on page 4-55for an example of this screen.

For easy movement between screens, select the FrAssign function key to go directly to the Frame Relay Network Assignments screen.

ime Slot Assignment Rules:

Valid Network time slots are either Available or contain a DSX-1 time slot assignment.

Valid DSX-1 time slots are those that are unassigned, including the currently

Tassigned time slot.

Order of display is as follows:

—Available is the first selection.

—Then, from the lowest DSX-1 interface to the highest DSX-1 interface.

—Then the lowest available time slot number to the highest available time slot number.

For example, if the cursor is on a field with the Available value under assigned time slot Ntt, pressing the Spacebar causes this field’s values to cycle through all valid DSX-1 time slots, starting with Ds-p/yy, assuming it is unassigned. If Ds-p/ttis already assigned, the next valid time slot in the order described above is displayed.

4-54 September 2002 9128-A2-GB20-80