Paradyne CSU, DSU, 9126-II Changing Configuration Options, Configuration → PVC Connections

3. Configuration Procedures

Changing Configuration Options

Procedure

To change configuration option settings:

1.From the Configuration Edit/Display menu, select a set of configuration options and press Enter.

For example:

Configuration → PVC Connections

2.Select the configuration options that are applicable to your network, and make appropriate changes to the setting(s). See Chapter 2, User Interface and Basic Operation, for additional information.

When creating new PVC connections or management PVCs, some configuration options will be blank. For a valid setting to appear, Tab to the configuration option and press the spacebar.

3.Repeat Steps 1 and 2 until all changes are complete.

NOTES:

—Only Security Access Level 1 users can change configuration options.

—Security Access Level 2 users can only view configuration options and run tests.

—Security Access Level 3 users can only view configuration options; they cannot change configuration options or run tests.

9128-A2-GB20-80 September 2002 3-5