Paradyne 9126-II Selecting a Frame Relay Discovery Mode, Discovery Mode Configuration Description

4. Configuration Options

Selecting a Frame Relay Discovery Mode

When a Frame Relay Discovery Mode is active, the FrameSaver unit “discovers” network DLCIs from the network LMI status response message. It configures a network DLCI and a user data port DLCI, and automatically connects them to create a PVC.

Main Menu → Auto-Configuration→Frame Relay Discovery Mode

Automatically configured network DLCIs are multiplexed, and each automatically configured port DLCI carries the same DLCI Number as its corresponding network DLCI. These are the same DLCI numbers that would have been available had the FrameSaver unit not been inserted in the link, between your equipment and the network.

NOTE:

A local Management PVC (e.g., the PVC between the router and the

FrameSaver unit’s user data port) must be configured manually.

The following will occur when a Frame Relay Discovery Mode is selected:

Discovery Mode	Configuration Description
1MPort	Auto-configuration is enabled on Port-1.
	A management DLCI is configured.
	A multiplexed network DLCI containing two embedded
	DLCIs (EDLCIs) is configured for Port-1 user data and
	management data.
	A PVC connection is configured between the network
	and port DLCIs.
1Port	Auto-configuration is enabled on Port-1.
	No management DLCI is configured.
	A multiplexed network DLCI is configured for Port-1 user
	data.
	A PVC connection is configured between the network
	and port DLCIs.
1PPort	Auto-Configuration is enabled on Port-1.
	A Port-1 DLCI is created for each network DLCI and
	automatically cross-connected to it.
	Payload management is configured for the network DLCI
	and assigned the Node IP Address.
2MPorts	Auto-configuration is enabled on both Port-1 and Port-2.
(only applies to models with	A multiplexed network DLCI containing three EDLCIs is
multiple data ports)	configured for Port-1 customer data, Port-2 customer
	data, and management data.
	PVC connections are configured between the network
	Tand port DLCIs.
	A management PVC is configured on the network
	interface.

9128-A2-GB20-80 September 2002 4-9