4. Configuration Options

Setting Up ISDN Link Profiles

For models with ISDN backup capability, select ISDN Link Profiles from the ISDN menu to set up the ISDN Link Profiles (see Table 4-11, ISDN Link Profile Options).

Main Menu Configuration ISDN ISDN Link Profiles

Table 4-11. ISDN Link Profile Options (1 of 3)

Link Name

Possible Settings: ASCII Text Entry, HQ_Site

Default Setting: HQ_Site for first link; blank for all others

Assigns the name to the ISDN link profile. It is generally the backup destination for a frame relay link. Each profile must have a unique link name. If the link name field is blank, the link profile will be deleted. Use ASCII text, 8 characters maximum.

ASCII Text Entry – Assigns a name to identify the ISDN link (maximum 255 characters).

NOTE: To prevent confusion, do not use the following link names: Network, Net1-FR1,

Port-1, or Port-2. These names will be treated as nonunique and the Link Name Not

Unique message appears and you must enter another name.

HQ_Site – The link name configured in the remote site unit (originating a backup call) for the central site unit (answering a backup call). One link has a default value of HQ_Site to allow for Automatic Backup Configuration.

Link Status

Possible Settings: Auto, Disable

Default Setting: Auto

Determines whether the ISDN frame relay link is in or out of service.

Auto – The link is configured to be in service when needed. Packets will be transmitted and received on the interface, and the LMI for a PVC connection will become active when the link is required. If this profile is configured as the alternate link and the primary link or DLCI fails, the unit dials the Outbound Phone Number, or the Alternate Outbound Phone Number if the first call was unsuccessful. The unit also answers calls from Inbound Call IDs associated with this link. This link profile becomes active when:

This profile is configured as the alternate link and there is a failure of a primary link

Tor DLCI.

Source or Primary Destination DLCIs are configured on this link.

When the primary link recovers, the call is automatically disconnected.

Disable – The frame relay link is out of service. No data will be transmitted or received on the interface. If there is are any active calls when disabled, the calls are ended and no calls will be answered or originated using this profile.

9128-A2-GB20-80

September 2002

4-49

Page 93
Image 93
Paradyne 9126-II, CSU, DSU Setting Up Isdn Link Profiles, Main Menu → Configuration → Isdn → Isdn Link Profiles, Link Name