Paradyne 9128-II, CSU, DSU, 9126-II manual Table C-9. Dhcp Server Commands 2

C. Router CLI Commands, Codes, and Designations

Table C-9. DHCP Server Commands (2 of 3)

lease {days[hours ] [minutes ] infinite}

no lease [days[hours ] [minutes] infinite]

Minimum Access Level: Administrator

Command Mode: config-dhcp

Allows you to specify or clear the lease time for an IP address assigned to a DHCP client. After the lease time has expired, the address assignment is no longer valid. The default lease time is one day.

Example: lease 120 23 0

days – Number of days the lease is valid. The default is1. Valid range of days is 0–365.

hours – Number of hours the lease is valid. The default is 0. Valid range for hours is 0–24.

minutes – Number of minutes the lease is valid. The default is 0. Valid range for minutes is 0–59.

infinite – Specifies an infinite lease time. The IP address assignment does not expire.

default-router ip-address

no default-router [ip-address]

Minimum Access Level: Administrator

Command Mode: config-dhcp

Allows you to configure or remove the default router IP address provided to clients by the DHCP server. The default router address is provided to the clients in the DHCP reply message from the DHCP server and as the next hop router by the clients. The IP address for the default router should be on the same subnet as the client.

Example: default-router 132.53.4.2

ip-address– Specifies the IP address of the default router. The default is None.

domain-name domain-name

no domain-name [domain-name]

Minimum Access Level: Administrator

Command Mode: config-dhcp

Allows you to specify or remove the domain name provided to clients by the DHCP server. This domain name is provided to the clients in the DHCP reply message from the DHCP server.

domain-name– Specifies a string defining the domain name. The domain name string contains 255 ASCII printable characters. The default is None.

dns-server ip-address

no dns-server [ip-address]

Minimum Access Level: Administrator

Command Mode: config-dhcp

Allows you to specify or remove the Domain Name System (DNS) IP address provided to clients by the DHCP server.

Example: dns-server 132.53.4.2

ip-address– Specifies the IP address of the DNS server.

C-16 September 2002 9128-A2-GB20-80