Paradyne CSU, DSU, 9126-II, 9128-II manual Device Messages 3 What It Indicates What To Do, Pvc

7. Operation and Maintenance

Table 7-6. Device Messages (3 of 6)

Message	What It Indicates	What To Do
Invalid Password	Login is required and an	Try again.
	incorrect password was	Contact your system
	entered; access is denied.
		administrator to verify your
		password.
Invalid Test	A conflicting loopback or	Wait until other test ends and
Combination	pattern test was in progress	message clears.
	when Start was selected to	Cancel all tests from the Test
	start another test, or was
		screen (Path: main/test).
	active on the same or
	another interface when	Stop the test from the same
	Start was selected.	screen the test was started
		from.
Limit of six Login IDs	An attempt to enter a new	Delete another login/password
reached	login ID was made, and the	combination.
	limit of six login/password	Reenter the new login ID.
	combinations has been
	reached.
Limit of Mgmt PVCs	New was selected from the	Do not create the management
reached	PVC Connection Table and	PVC.
	the maximum number of	Delete another management
	management PVCs has
		PVC, and try again.
	already been created.
Limit of PVC	New was selected from the	Do not create the PVC
Connections reached	PVC Connection Table and	Tconnection.
	the maximum number of	Delete another PVC
	PVCs has already been
		connection, and try again.
	created.
Name Must be Unique	Name entered for a	Enter another 4-character name
	management PVC has	for the logical/management link.
	been used previously.
No Destination Link	New was selected from the	Configure additional DLCIs for the
DLCIs Available	PVC Connection Table, but	network link and try again.
	even though DLCIs are
	available to form a
	connection, no DLCIs are
	available on the network
	link, which is a suitable PVC
	Destination.
No DLCIs available for	New was selected from the	No action needed, or configure
connection	PVC Connection Table, but	more DLCIs and try again.
	all configured DLCIs have
	been connected.
	New was selected from the	Configure more network and/or
	Management PVCs option	Port-1 Links/DLCIs pairs and try
	screen, but all Link/DLCI	again.
	pairs have been connected.

7-14 September 2002 9128-A2-GB20-80