Paradyne 9126-II Test Status Messages 1 What It Indicates, Dclb Active, framerelaylink 1 or

7. Operation and Maintenance

Test Status Messages

These test messages appear in the right column of the System and Test Status screen. You have the option of allowing the test to continue or aborting the test. See Chapter 8, Troubleshooting, for more information on tests, including how to start and stop them.

Table 7-9. Test Status Messages (1 of 2)

Message	What It Indicates
DCLB Active, frame_relay_link 1 or	A Data Channel V.54 Loopback (DCLB) is active on
DCLB Active, Port-2	the specified frame relay link, or Port-2.
DTE External LB Active, Port-n	An external DTE Loopback is active on the user
	data port.
DTE Init. Ext LB Active, Port-n	An external DTE Loopback is active on the user
	data port.
DTPLB Active, Port-n	A Data Terminal Payload Loopback (DTPLB) is
	active on the user data port.
Lamp Test Active	The Lamp Test is active, causing the LEDs on the
	faceplate to flash on and off.
LLB Active, Interface 2	A network Line Loopback (LLB) is active on the
	specified network, DSX-1, or ISDN PRI interface.
No Test Active	No tests are currently running.
PLB Active, Interface 2	A Payload Loopback (PLB) is active on the
	specified network, DSX-1, or ISDN PRI interface.
PVC Loopback Active, DLCI nnnn,	A PVC Loopback is active on the specified DLCI for
frame_relay_link 1 ,3	the frame relay link.
RLB Active, Interface 2	A network Repeater Loopback (RLB) is active on
	the specified network or DSX-1 interface.
Send Pttn Active, Interface 2	A Send Pattern test is active on the specified
	interface.
	This test cannot be activated on user data ports that
	have Port Use set to Frame Relay.

1frame relay link is one of the following:

–Net1-FR1. The frame relay link specified for the network interface, Network 1.

–Port-nfor a 1-slot unit, or SsPort-nfor a NAM in a multislot housing (the frame relay link associated with the specified user data port in the specified slot).

–ISDN Link Name on a non-network ISDN DBM interface.

2Interface is one of the following:

–Network 1

–DSX-1

–Port-n

–ISDN, BRI or PRI

3nnnn indicates a DLCI number of 16 through 1007.

9128-A2-GB20-80 September 2002 7-27