Paradyne 9128-II, CSU, DSU, 9126-II manual Has a Level-1 login and Level-2 telnet access has

6. Security and Logins

Limiting Telnet or FTP Access Over the TS Access Management Link

Procedure

To limit Telnet or FTP access when the session is on the TS Access Management Link:

1. Select the Telnet and FTP Session options.

Main Menu → Configuration → Management and Communication →

Telnet and FTP Sessions

2.Disable Telnet Session and/or FTP Session, as appropriate.

3.Return to the Management and Communication menu, and select Node IP.

4.Set the following configuration options, as appropriate.

To . . .	Set the configuration option . . .
Disable access via the TS	TS Access Management Link to None.
Access Management Link
Assign an access level to the	TS Access Management Link’s Access Level to
TS Access Management Link	Level-2 or Level-3.
	NOTE: Regardless of a user’s login access level, a
	user cannot operate at a level higher than the
	access level specified for the session (e.g., if a user
	has a Level-1 login and Level-2 telnet access has
	been set, the Level-1 user can only operate as a
	Level-2 user).
	If you are going to allow users to configure the unit,
	keep the access at Level-1.

5. Save your changes.

See Configuring Telnet and/or FTP Session Support or Configuring Node IP Information in Chapter 4, Configuration Options, for more information about these configuration options.

6-8 September 2002 9128-A2-GB20-80