Paradyne 9126, CSU, DSU Main Menu → Status → Trap Event Log, Trap Event Log Screen Example

7. Operation and Maintenance

Trap Event Log

The Trap Event Log displays all traps stored in the SNMP trap event log. The following log example describes the alarm conditions that will generate an SNMP trap for a physical interface, and for the frame relay LMIs and DLCIs. These alarm conditions also generate Health and Status messages seen on the Health and Status Messages on page 7-20.

Main Menu → Status → Trap Event Log

Trap Event Log Screen Example

main/status/event_log			9128-II
Device Name: Node A			5/26/2000 23:32
		TRAP EVENT LOG
		Total Trap Events: 535
Time Elapsed
Since Event		Event
0d	23:59:59	Change in Frames Discarded due to Inbound Resource Errors on Sync
		Data Port S01P1 frame relay link “Port-1" exceeded threshold of 1
		by 105.
2d	23:59:59	Change in Total LMI Errors on Network T1 frame relay link
		“Net1-FR1" exceeded threshold of 1 by 59.
6d	23:59:59	DLCI 101 of Sync Data Port S01P1 frame relay link “Port-1" up.
10d	23:59:59	DLCI 101 of Sync Data Port S01P1 frame relay link “Port-1" down.
20d	23:59:59	Primary clock failed.
56d	23:59:59	Sync Data Port S01P1 frame relay link “Port-1" LMI down.
64d	23:59:59	Network T1 frame relay link “Net1-FR1" LMI down.
122d	23:59:59	Network T1 down.
364d	23:59:59	Unit reset.

--------------------------------------------------------------------------------

	ESC for previous menu	MainMenu	Exit
Refresh	PgUp PgDn

Up to 12 trap events can be displayed on a screen, the most current first. Page down (PgDn) to view less current trap events. When no trap events have been logged, No Events in Log. appears in the Event column.

ASCII trap strings used to describe trap events are provided in the tables contained in Standards Compliance for SNMP Traps in Appendix B, SNMP MIBs and Traps, and RMON Alarm Defaults.

9128-A2-GB20-80 September 2002 7-69