5 - 17 5 - 17
MELSEC-Q
5 UTILITY PACKAGE (GX Configurator-AD)
[Explanation of items](1) Contents of screen display
Setting item : The I/O signal or buffer memory names are dis played.
Current value : The I/O signal status or current value of buffer memory are
monitored.
Setting value : Se lect or enter the data to be written during t est operation.
(2) Explanation of the command buttons
Current value display The current value of the selected item is displayed.
(This is used to check text that cannot be dis played in
the current value field. However, in this utility package,
all items can be displayed in the display fields).
Make text file Creates a file consisting of the screen contents in text file
format.
Start monitor /
Stop monitor
Selects whether or not the current va lue fields are
monitored.
Execute test Per forms a test of the selected item . To select more
than one item, select multiple items while holding down
the Ctrl key.
Close Closes the screen currently displayed and retur ns to
the previously displayed screen.
REMARK
The following describes an example where sam pling process for the selection test
operation is changed to a 10-time averaging process setting.
(1) Set averaging process in the setting v alue field for CH Sampling
process/Averaging process setting.
(2) Set number of times in the setting valu e field for CH Time/number of times
specifying.
(3) Click the setting value field for CH Average time/average num ber of times
setting to select.
(4) After entering the average number of tim es, press the Enter key.
At this point, nothing has been written to the A/D converter module.
(5) Select the setting value fields that were specified in steps 1 to 4 while ho lding
down the Ctrl key.
(6) Click Execute test to execute write operation.
Once writing has been completed, the value that was written will be displayed in
the present value field.