7 - 17 7 - 17
MELSEC-Q
7 ONLINE MODULE CHANGE
(b) After making sure that the indication in the Cur rent value field of CH A/D
conversion enable/disable setting is "Disable", change th e Se tt in g val ue
field of Operating condition setting request t o "Setting request", and click
the [Execute test] button to stop conversion.
(c) If the saved buffer memory contents are not yet prerecorded, record them
in the following procedure.
1) Display the pass data screen of GX Configurator-AD.
2) Set the pass data classification setting and make a pass data read
request. (Refer to Section 5.6.4, 5.6.5.)
3) Compare the current values of the industrial shipm ent settings and
user range settings offset/gain values with those of the range
reference table. Refer to Section 7.4 for the ra nge reference table.
4) If the values are proper, record the offset/gain valu es of the pass data
classification setting, industrial shipment set tings and user range
settings.
: The Q68ADV/Q68ADI does not require the sett ing and recording of the
pass data classification setting.
POINT
If the buffer memory values compared with the ref erence table are not proper, save
and restoration of the user range cannot be exec uted.
Before executing module control resumption, mak e offset/gain setting in the GX
Configurator-AD. (see Section 5.6.2)
Note that if module control is resumed without of fset/gain setting being made,
operation will be performed with the default values.