2 - 1 2 - 1
MELSEC-Q

2 SYSTEM CONFIGURATION

22 SYSTEM CONFIGURATION

2.1 Applicable Systems

This section describes the system configur ation for the A/D converter module.

(1) Applicable module and the number of modules that can be installed

The following are the CPU module and network m odule (for remote I/O stations)
in which the A/D converter module can be ins talled and the number of modules
that can be installed.
Applicable module Number of modules that
can be installed Remarks
Q00JCPU Maximum 16
Q00CPU
Q01CPU Maximum 24 (1)
Q02CPU
Q02HCPU
Q06HCPU
Q12HCPU
Q25HCPU
Maximum 64 Can be installed in Q mode only
(1)
CPU module
Q12PHCPU
Q25PHCPU Maximum 64 (1)
Network module
QJ72LP25-25
QJ72BR15
QJ72LP25G
QJ71LP25GE
Maximum 64 MELSECNET/H Remote I/O
station ( 2)
1 See User's Manual (Function Explanation, Program Fundamentals) for the CPU module to use.
2 See Q Corresponding MELSECNET/H Network System Reference Manual (Remote I/O
network).

(2) Base Unit in which the converter module can be installed

The A/D converter module can be installed in a ny I/O slot ( 3) of the base unit.
However, a power shortage may occur depending on the combination with other
installed modules and the number of modules us ed, so always take into
consideration the power supply capacity when installing modules.
3 Limited to the range of the number of I/O points in the CPU module and network module (for
remote I/O stations).

(3) Compatibility with a multiple PLC system

First read the QCPU (Q mode) user's manual (Fu nction Explanation, Program
Fundamentals) if the A/D converter module is used with a multiple PLC system.
(a) Compatible A/D converter module
Use an A/D converter module with function versio n B or higher if using the
module in a multiple PLC system.
(b) Intelligent function module parameters
Perform PLC write of the intelligent function m odule parameters to the
control PLC of the A/D converter module only.