NetComm manual NB5540 NB5540, 54Mbps WIRELESS FIREWALL VPN ROUTER WITH 10/100 4-PORT SWITCH

NB5540

NB5540

54Mbps WIRELESS FIREWALL VPN ROUTER WITH 10/100 4-PORT SWITCH

KEY FEATURES

TECHNICAL SPECIFICATIONS

•One-Page-Setup (covers PPPoE ADSL, Optus cable, DHCP, Telstra Cable Heartbeat, Static IP)

•Active Firewall featuring Stateful Packet Inspection (SPI) and prevention of DoS attack (see side panel)

•54Mbps wireless IEEE 802.11g standard with auto- selection of optimum data rates

•Network Address Translation (NAT)

•5 VPN Endpoints

•VPN Pass-through or NAT Traversal (PPTP & IPSec enable/disable)

•Universal Plug and Play

•Ping Diagnostics

•Trace Route Diagnostics

•Back up & Restore Configuration

•Online Log viewer/Syslog/email reporting

•DDNS (Dynamic DNS)

•DHCP Server

•Access Control (ACL’s by IP/Mac/URL keyword)

•Port Forwarding

•Special Application (Port Triggering)

•DMZ host/Multi DMZ

•Web-based Administration (configuration)

•Remote Administration (via the Internet configuration)

•SNMP support (4 Communities, Enable/Disable)

•Dynamic Routing (RIP 1 & 2)

•Static Routing

•1 + 2 Year Warranty (Conditional upon registration online.)

PACKAGE CONTENTS

•NetComm NB5540 Wireless Firewall Router

•Cat-5 RJ45 Straight-through Ethernet Cable

•Plug Pack 12V DC, 1A

•Installation Guide

Your Netcomm dealer:

Model Number	NB5540
Standards	IEEE 802.3 (10BaseT),
	IEEE 802.3u (100BaseTX)
	IEEE 802.11g Wireless

Ports WAN: One 10/100 RJ-45 port LAN: Four 10/100 RJ-45 ports

All ports with auto cross-over detection

Wireless access point

Protocol	TCP/IP, UDP, NAT,DHCP, PPPoE,
	Heartbeat, CHAP, PAP
Maximum Users	Up to 253 users
Cabling Type	UTP Category 5 or better

IP Setting WAN: DHCP client, Static IP LAN: DHCP auto-assignment,

Static IP

VPN Endpoints – IPSec

•Maximum tunnels: up to 5

•Local secure group: IP, Subnet or IP range. •Remotesecuregroup:IP,Subnet,IP range,HostorAny

•Remote security Gateway: IP, FQDN, Any

•Encryption: DES, 3DES or none

•Authentication: MD5, SHA or none

•Authentication method: Preshared key

•Key Management: Auto IKE (PFS or none) or Manual (Encry, Auth, In-SPI, Out SPI)

VPN Pass-through (NAT traversal)

•IPSec enable/disable

•PPTP enable/disable

•Concurrent sessions: up to 50 dependent on data

Firewall & Security

•Prevent Dos attack: Ping of Death, LAND, IP spoofing, SYN flood, IP Smurfing

•Stateful packet inspection (check inbound against outbound)

•NAT deny external Intruder

•ACL Filter: IP, MAC, URL keyword

•Block all: Proxy, Active X, Java /script, cookies, time of day/week

Management

•Web-based configuration

•Admin Password login

•Fault tolerant TFTP upgradable firmware

•Reset button or Factory default reset

•SNMP

Inbound Routing

•Special Application (Port Triggering)

•Port Forwarding

•UPnP + Port Translation

•DMZ host / Multi DMZ.

LAN Routing

•Dynamic (RIP 1 & 2, independent Tx / Rx)

•Static

Wireless

•802.11g standard • 802.11b standard

•Auto/manual data rates of 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 Mbps

•WEP 64/128bit

•MAC Filtering

Power External, 12V DC, 1A

Environmental Operating Temp 0 ~ 45˚C

Storage Temp -20 ~ 60˚C

Humidity 0% ~ 90% Non-Condensing

Certifications C-Tick (N367)

Dimensions 122 (L) x 175 (W) x 31 (H) mm

System Requirements

Operating system independent – ideal for Windows® Macintosh, Linux & TCP/IP systems

Power			Reset button
	ADSL or Cable
	modem	Four 10/100 auto-sensing
	Ethernet port	switched ports

Trademarks and registered trademarks are the property of NetComm Limited or their respective owners. Specifications are subject to change without notice. Images shown may vary slightly from the product.