Lava Computer IP/232 manual Configuration, Configuring network settings

4 Configuration

Configuration consists of the following:

A.Configuring network settings

B.Port configuration

C.Host configuration

D.Terminal Side Data and Protocol configuration

E.Password selection

F.Upgrading software

A. Configuring network settings

PayLink-IP devices installed on your network will need unique IP addresses. These are set by using a web browser.

The factory default network settings for the PayLink-IP are:

IP address:	192.168.0.35
Subnet mask:	255.255.255.0
Gateway address:	0.0.0.0
Name:	[empty]
Workgroup:	[empty]
DHCP detection:	disabled

Configuring PayLink-IP network settings

To set a PayLink-IP's network settings, open a web browser and enter the IP address of the PayLink-IP into the browser's location bar. The embedded web server running on the PayLink-IP will display the opening screen of the PayLink-IP.