Using the Setup Program
40
Floppy Options

This submenu is for configuring floppy drives.

Table 10. Floppy Options

Feature Options Description
Floppy Disk Controller • Disabled
• Enabled (default) Disables or enables the integrated floppy
disk controller.
Diskette A: • Disabled
• 360 KB, 5¼″
• 1.2 MB, 5¼″
• 720 KB, 3½″
• 1.44/1.25 MB, 3½″ (default)
• 2.88 MB, 3½″
Specifies the capacity and physical size
of diskette drive A.
Floppy Write Protect • Disabled (default)
• Enabled Disables or enables write protect for the
diskette drive(s).
DMI Event Logging

This submenu is for configuring the DMI event logging features.

Table 11. DMI Event Logging Submenu

Feature Options Description
Event log capacity No options Indicates if there is space available in the event log.
Event log validity No options Indicates if the contents of the event log are valid.
View DMI event log No options Enables viewing of DMI event log.
Clear all DMI event logs • No (default)
• Yes Clears the DMI event log after rebooting.
Event Logging • Disabled
• Enabled (default) Enables logging of DMI events.
ECC Event Logging • Disabled (default)
• Enabled Enables logging of ECC events.
Mark DMI events as read No options Marks all DMI events as read.
Video Configuration Submenu

This submenu is for configuring video features.

Table 12. Video Configuration Submenu

Feature Options Description
Palette Snooping • Disabled (default)
• Enabled Controls the ability of a primary PCI graphics controller to
share a common palette with an ISA add-in video card.
AGP Aperture Size • 64 MB (default)
• 256 MB Specifies the aperture size for the A.G.P. video controller.