Panasonic PT 52LCX66 Operating Peripheral Equipment, To find a code not listed in the code list

Operating Peripheral Equipment

You can operate other manufacturers’ components using this unit’s Remote Control.

1 Connect the external devices to the Projection Display and turn Off the external devices.

2	Press both buttons
	simultaneously for more than

3 seconds.

•Release the buttons when the equipment selection buttons

+start flashing.

3	Select the equipment with the
	equipment selection button.
	• The selected button remains lit

(other buttons are not lit).

4	Input the equipment’s 4-digit
	Remote Control code.
	(p. 60-62)

5	Confirm the equipment with
	the Remote Control.

• The external equipment turns On.

If the equipment does not operate with Remote Control

•When your equipment has a single code

→Input the remote control code again

•When your equipment has multiple codes

→Change the code with step 4 above and test again (p. 60-62)

Caution:

•Registration will fail if the wrong code is input or it takes more than 30 seconds to register.

To find a code not listed in the code list

This procedure searches all codes and is called the “sequence method.”

1	After step 3 above, change the
	code and test store.

• Operate the equipment with the Remote Control. (p. 59)

• Repeat until the code is found.

•It may take many attempts

+before the correct code is found.

2	When the correct code is
	found.

58 For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo