Panasonic PT 61LCX66, PT-61LCX16, PT-52LCX16, PT-56LCX16 Automatic program setting, Basic Operation

Automatic program setting

Automatically searches and adds receivable channels to memory.

Press MENU to display the Main Menu screen.

1	Press to select “Setup” icon.
	Press to display the Setup
	menu.
	Menu

Picture

Audio

Timer

Lock

Memory card

Setup

4	Press to select “ANT In”.
	Press to select “Antenna” or
	“Cable”.
	Auto program
	ANT In	◄	Cable	►
	Mode		All
	Start scan
5	Press to select “Mode”.
	Press to select “All” or
	“Analog”.
	Auto program
	ANT In		Cable
	Mode	◄	All	►
	Start scan

Basic Operation

2	Press to select “Program
	channel”.
	Press to display the Program
	channel menu.
		Setup
		CH scan	All
		Language
		Program channel
		Input labels
		CC
		Other adjust
3
	Press to select “Auto”.
	Press to enter the Auto menu.
		Program channel
		Auto
		Manual
		Signal meter

6	Press to select “Start scan”.
	Press to start Scan.
	Now scanning analog channel...
	Progress

7 After Auto program is complete, the unit will return to Manual program mode. To place the channels that were located by auto scan in memory, move the cursor to “Apply” and press OK. (p. 30-31)

If OK is not pressed after selecting APPLY, the channels will not be memorized.

Notes:

•Some channels with very weak signals may be locked into memory. If desired, these channels can be deleted manually using the “Manual program setting”. (p. 30)

•“Auto program” must be done when you select the input signal for the first time or whenever you change the antenna configuration.

29