Panasonic PT 61LCX66 3 1 Turnleft. the Lamp Cover Lock/Open Knob to the, 6 1 Close the Lamp Cover

Note:

• Remove Front Cover after Front Door (p. 10) is opened.

2 Pull on both ends of the Front Cover 1 with your fingertips to remove it.

Front Cover

1

3 (1) Turnleft. the Lamp Cover Lock/Open Knob to the

(2)Pull the Lamp Cover out and down to open it.

(1)

5 (1) Insert the new Lamp Unit being careful of the insertion direction.

•Press on the arrow mark to confirm proper insertion.

(2)Turn the Lamp Unit Lock/Open Knob to the right until it clicks.

(2)

Lamp Unit

Lock/Open Knob

(1)

Lamp Unit

Notes:

•Properly dispose of the old lamp. Please see page 64.

•Secure the Lamp Unit and Lamp Unit housing door. If they are not secured, a protective circuit will not allow the lamp to turn on.

•At this point, confirm that the Lamp Unit will not come out by pulling on the Lamp Unit Lock/Open Knob.

6 (1) Close the Lamp Cover.

(2)Turn the Lamp Cover Lock/Open Knob to the right.

(2)

	Lamp Cover
(2)	Lock/Open Knob
	Lamp Cover

(1)

Lamp Cover Lock/Open Knob

Lamp Cover

4 (1) Turnleft. the Lamp Unit Lock/Open Knob to the

(2)Grasp the Lamp Unit Lock/Open Knob and slowly remove the Lamp Unit as shown.

(1)

Lamp Unit

Lock/Open Knob

(2)

Lamp Unit

CAUTION

•The Lamp Unit is hot right after use and may cause burns if touched.

•Please allow the Lamp Unit to cool before handling or replacing it.

7 Be sure that the hook on the Front Cover is securely fastened to the unit as shown.

Front Cover	Hook	Information
After lamp replacement, you must reset the lamp
time. Refer to the instructions enclosed with the
lamp unit (Part No.: TY-LA1001).

65