Panasonic PT-56LCX16, PT-61LCX16 manual Control with Hdmi Hdavi Control, Automatic Input Switching

Setup Features (continued)

Control with HDMI “HDAVI Control”*

*Simultaneously controls all Panasonic “HDAVI Control” equipped devices with one-button operation using a single remote.

Newer Panasonic audio-video products with HDMI output connections can be controlled using the TV’s remote. Limited features, such as home theater system volume control and automatic switching to the TV’s HDMI input are possible.

•This feature is limited to models with Panasonic’s “Control with HDMI”. Refer to the individual instruction manuals for compatibility information.

•Non-HDMI-compliant cables cannot be utilized.

•We recommend using Panasonic HDMI cables RP-CDHG15 (1.5 m), RP-CDHG30 (3.0 m), RP-CDHG50 (5.0 m), etc. (Product numbers correct as of January 2006.)

Notes:

•“Control with HDMI” function does not work in countries other than the USA and Canada.

•Before using HDMI control functions, the connected equipment (DIGA, RAM theater, Player theater, AV amp) must also be set. For details, see the operation manual for each device.

•For equipment connection details, see pages 19-21.

•Set up the equipment, using it’s manual, to enable this function.

•Turn the TV on again, with the equipment on, when connection or setup is changed.

•This function may not work properly depending on the equipment condition.

•The equipment can be operated by the TV’s remote, with this function on, even if the TV is in Standby mode.

•Image/sound may not function for the first few seconds of playback.

•Image/sound may not function for the first few seconds after Input mode is switched.

•Volume function will be displayed when adjusting the volume of the equipment.

•Easy playback is also available by using the remote of the Amplifier. Read the Amplifier manual.

1	Press to select “Other adjust”.
	Press to display the Other
	adjust menu.
	Setup

CH scan All

Language

Program channel

Input labels

CC

Other adjust

2	Press to select “Ctrl with
	HDMI”.
	Press to select “On”.

•Default setting is “On”. If no HDMI devices are connected or standard HDMI (without “Control with HDMI”) is used, set to “Off”.

				Other	adjust
				Prog - out		stop	Off
				Ctrl	with	HDMI	On
				Power	off	link	Set
				Power	on	link	No
3
			Press to select the each item.
			Press to select the setting.
	Item			Explanations
		Controls equipment connected to HDMI
Ctrl with HDMI		terminal. (p. 19-21)
		• “Power off link” and “Power on link” do not
		work if “Off” is selected.
		When “Set” is selected, the TV can turn off
Power off link		and on the connected home theater/RAM
		theater/player theater and/or DIGA-DVD
		player.
		When “Set” is selected, the TV can
		automatically turn on and switch to the
		appropriate HDMI input whenever a
		“Control with HDMI” compatible DVD
		player/recorder is initially turned on or Play
Power on link		mode is selected.

•While the power lamp is blinking, the picture cannot be seen.

•Power on link will not work until lamp cooling is completed when power is turned off.

Note:

•When the HDMI connection is changed, set “Ctrl with HDMI” first to “Off” and then “On” using the Setup Menu. (p. 19-21)

Automatic Input Switching

At the start of DIGA/Player theater/RAM theater playback, TV input automatically switches to the input compatible with playback equipment.

•For RAM theater, the speakers automatically switch to theater.

If using DIGA operation and the DIGA menu is displayed, the TV input automatically switches to DIGA. If TV power is Off, it switches On.

56 For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo