Panasonic PT 56LCX66 Using the CH/VOL Button, Channel and Program Tuning, Unit Status display

Using the CH/VOL Button

Select desired channel:

Press CH ▲▼ or NUMBER keys.

Adjust to desired volume level:

Press VOL ► or VOL ◄.

Notes:

•The channel number and volume level are stored even after the unit is turned off.

•Power consumption can be reduced if the volume level is lowered.

Channel and Program Tuning

Channel and Program tuning in digital television differs from conventional television. With DTV, many programs can exist within a single 6 MHz channel. These channels behave as sub-channels within a single channel. When tuning to a digital channel, the unit will also tune to a program and will indicate the channel and program in the on-screen Channel Banner display.

In order to select channels properly, Auto program must be performed. (p. 29)

Follow the procedure below to directly enter the channel number using the NUMBER keys on the Remote Control.

Select analog channel

1	Press the NUMBER keys on the
	Remote Control to enter the Channel
	number. Press OK.
	The following is an example of tuning
	to channel 15.
2	Direct Tuning Example
	Step	Action	Channel Banner
			Display
	1	Press 1	1
	2	Press 5	15
	3	Press OK	15

Note:

•If, during channel selection, no action is taken for several seconds, the Channel Banner is exited and the currently input channel is automatically selected.

Select digital channel

1	If tuning a digital channel and your
	channel contains more than one

3	Direct Tuning Example
	Step	Action	Channel Banner
			Display
	1	Press 1	1
	2	Press 5	15
	3	Press -	15-
4	4	Press 1	15-1
	5	Press OK	15-1

Note:

•If, during channel selection, no action is taken for several seconds, the Channel Banner is exited and the currently input channel is automatically selected.

Unit Status display

Press the Channel ▲▼ or RECALL button, except when the MENU screen is displayed, to display current unit status information.

Channel Banner: Minimized

Press CH ▲▼ to minimize the displayed channel banner. It will display the channel number, and the station identification (if available).

Channel Number

15-2

ABC - HD

Station Identifier

Channel Banner: Maximized

Press RECALL to maximize the displayed channel banner.

Channel, Program and Station identifier

Program title

Basic Operation

2

program, press PROG and enter the program (1, 2, 3 etc.) using the NUMBER keys. Press OK. The following is an example of tuning to channel 15-1.

15-2			Andrew’s cooking show
ABC - HD	CC	SAP	TV-G	1080i		STANDARD	4 : 3		30
Closed Caption			Rating		Picture mode			Time remaining
					setting			in Sleep Timer
					resolution
SAP indication Signal							Aspect

33