Panasonic PT 61LCX66, PT-61LCX16, PT-52LCX16 manual RGB signals that can be input, Getting Started

RGB signals that can be input

The table below lists the different types of RGB signals that can be input.

If a signal which differs greatly from the types listed below is input, the picture may not be displayed correctly, or a black background may be displayed.

			Signal data
	Mode type
		No. of dots	Horizontal frequency	Vertical frequency
		(H × V)	(kHz)	(Hz)
	VGA400 (70 Hz)	640 × 400	31.47	70.08
	VGA480 (60 Hz)	640 × 480	31.47	59.94
	Macintosh 13˝	640 × 480	35.00	66.67
	VGA480 (75 Hz)	640 × 480	37.50	75.00
Signals
	SVGA (60 Hz)	800 × 600	37.88	60.32
	SVGA (75 Hz)	800 × 600	46.88	75.00
Computer
	SVGA (85 Hz)	800 × 600	53.67	85.06
	Macintosh 16˝	832 × 624	49.73	74.55
Personal
	* XGA (60 Hz)	1 024 × 768	48.36	60.00
	* XGA (70 Hz)	1 024 × 768	56.48	70.07
	* XGA (75 Hz)	1 024 × 768	60.02	75.03
	* XGA (85 Hz)	1 024 × 768	68.67	85.00
	* Macintosh 21˝	1 152 × 870	68.68	75.06

Notes:

•Input signals, other than those listed with a * mark, will give you a beautiful, stable picture.

•The D-SUB 15P connector can accept RGB (H-V sync separate).

•When an external video processor/scaler is used, it must have RGB (H-V sync separate) output.

Getting Started

23