Smeg ALFA31XE manual Manual cooking, How to use this program, Instructions for the user

Instructions for the user

display will only show the countdown from 60 to zero seconds (end of cooking time). When all the cooking time has passed, a BEEP will sound for 20 seconds and the display will show “End”.

During these 20 seconds the user can extend the cooking time as required, in manual mode, as follows.

Press START; the display will show "tp00". From now on, each pressure on the START key corresponds to one more minute's cooking; up to 10 extra minutes are permitted. Cooking will restart at the programmed temperature after 5 seconds.

When these additional minutes have passed the program repeats the cooking end procedure exactly as described above and

after the 20-second BEEP the word "End" will flash for 20 minutes, during which time the temperature will gradually fall, stabilising at 100°C. After 20 minutes, the oven switches off.

4.5Manual cooking

Use the knob to select the "easy" program (P10 *).

The special feature of this user-editable program is that the cooking parameters set are not retained in the memory when the knob is turned to any other position.

This means that an "empty" program is always immediately available for quick, easy editing.

4.5.1 How to use this program

Use the knob to select the "easy" program (P10 *).

The display shows “- - - - “ to indicate that there are no cooking parameters present.

Press START or keep it pressed to increase the preheating temperature; each time START is pressed the temperature increments by 5°C (from 30° to 300°).

Press STOP to increase the number of minutes of cooking (N.B. if a cooking time of 99 minutes is set, the cooking time will be infinite, meaning that cooking can only be stopped in manual mode, by ending the program).

Release STOP and preheating will start automatically after 5 seconds. N.B. – When the cooking process is over, to repeat the same program do not turn the knob and press START again.

26