Timex W-184 manual To Operate Waypoints Mode, To Store a Waypoint, To View or Edit Waypoints

Waypoints Mode includes the Track Back feature that allows you to navigate from your current position to a stored waypoint.

Waypoints Mode does not operate in conjunction with the chronograph. This mode displays and automatically updates current positional information, but does not keep time. In addition, Waypoints Mode does not display any performance data.

NOTE: Waypoints Mode will not operate without the use of the GPS-3D Sensor. If the GPS-3D Sensor is not operational, you will receive the message NO GPS DATA.

TO OPERATE WAYPOINTS MODE

1.Press MODE until Waypoints Mode appears.

2.Begin moving. The Watch automatically updates displayed positional information.

TO STORE A WAYPOINT

1.Press and hold START/SPLIT to store a waypoint.

2.Press + (DISPLAY) or - (STOP/RESET) to scroll through the nine pre-set waypoint labels.

3.Press DONE (MODE) to store the waypoint.

4.Repeat steps 1 through 3 to store up to nine other waypoints. A plus ( + ) sign will appear above the START/SPLIT key if the Watch has room for more waypoints.

If you attempt to set more than 10 waypoints, you will receive the message MEMORY FULL.

NOTE: You can also store waypoints in Navigate Mode.

TO VIEW OR EDIT WAYPOINTS

View stored waypoints

Change label for

stored waypoints

Erase stored

waypoints

1.Press ▲ (DISPLAY) to recall a stored waypoint.

2.Choose one of the following options to view or edit a waypoint:

ϖTo view a waypoint, press ▲ (DISPLAY) until you locate the waypoint you wish to view.

You can also continue to press ▲ (DISPLAY) until you navigate back to the current location.

ϖTo change the label of a waypoint, press SET/FORMAT until you locate the label you wish to use.

42 43