Timex W-184 manual To Switch Time Zones, To Synchronize Time of DAY with Fitness Sensors

25

TO SWITCH TIME ZONES

The Watch can track two time zones (T1 and T2). Look at the other zone by pressing START/SPLIT. Or, switch from T1 to T2 using these steps:

1.Press and hold START/SPLIT until HOLD FOR TIME 2 displays.

2.Continue to hold until the time switches and the Watch beeps.

3.Repeat steps 1 and 2 to switch back to T1. The message will read HOLD FOR TIME 1.

You must independently set the time of day for each time zone.

TO SYNCHRONIZE TIME OF DAY WITH FITNESS SENSORS

When you first activate the GPS-3D Sensor in conjunction with your Watch, you can expect one of the following scenarios:

ϖIf you activate the GPS-3D Sensor before setting the time of day, the Watch will synchronize both T1 and T2 with UTC. You will need to adjust the hour for both time zones to your local time.

ϖIf you activate the GPS-3D Sensor after setting the time of day, the Watch maintains the hour and date settings and synchronizes minutes and seconds to UTC for each time zone.

After initial use, the Watch will automatically correct any time inaccuracy upon activation of the GPS-3D Sensor and every 15 minutes thereafter.

TO VIEW PERFORMANCE DATA IN TIME OF DAY MODE

When using Fitness Sensors with your Watch, scroll through performance data by pressing and releasing DISPLAY.

Press to view

performance data

Performance data

Performance data viewing options for Time of Day Mode include:

ϖHeart Rate: Current heart rate (requires HR Sensor).

ϖSpeed: Current velocity (requires GPS-3D Sensor).

ϖPace: Current velocity, expressed in minutes per selected distance unit, such as miles or kilometers (requires GPS-3D Sensor).

ϖDistance: Distance traveled since the activation of the GPS-3D Sensor (requires GPS-3D Sensor).

24