
Watch button functions
The buttons on your Watch are
Setting buttons
Watch buttons also set Watch functions (for example, setting the time or a target heart rate zone). When the + and - symbols appear on the Watch display, you have initiated the setting process.
Watch case buttons
Most of the time, the Watch buttons function according to the labels printed on the case. If you do not see any of symbols on the display, follow the information printed on the Watch case to guide you in using the buttons.
INDIGLO¨
Press to light the watch
+
Press to increase the displayed value
SELECT
Press to begin setting or move to the next value
INDIGLO¨
DISPLAY Press to display performance data
DONE
Press when finished setting
-
Press to decrease the displayed value
MODE Press to go to the next mode
START/SPLIT
Press to start timing or take a split
SET/FORMAT
Press to set or change the display format
STOP/RESET Press to stop or press and hold to reset
TO SET WATCH FUNCTIONS
Use the following steps to set Watch functions:
1.Press and hold SELECT (SET/FORMAT). The message HOLD TO SET may appear.
2.Continue pressing SELECT (SET/FORMAT) until SET briefly appears on the display, followed by a flashing value.
3.Set the first value by pressing + (DISPLAY) or - (STOP/RESET).
12 | 13 |