Sharp EL-1611P operation manual Resetting the Unit, Printing Section

PRINTING SECTION
Printing speed:	Approx. 1.4 lines/sec. (Printing speed
	changes slightly depending upon the
	printing digits per line.)
Printing paper:	57 mm (2-1/4") – 58 mm (2-9/32") wide

80mm (3-5/32") in diameter (max.)

Operating temperature: 0°C – 40°C (32°F – 104°F)

Power consumption:	6V	(DC): 1.7 W
Dimensions:	96 (W) ⋅ 191 (D) ⋅ 40 (H) mm
	3-25/32" (W) ⋅ 7-17/32" (D) ⋅ 1-9/16" (H)
Weight:	Approx. 315 g (0.69 lb.) (with batteries)
Accessories:	Ink roller ⋅ 1 (installed), Paper roll ⋅ 1,
	Dry battery (R6) ⋅ 4 and Operation

manual

RESETTING THE UNIT

Strong impacts, exposure to electrical fields, or other unusual conditions may render the unit inoperative, and pressing the keys will have no effect. If this occurs, you will have to press the RESET switch on the bottom of the unit. The RESET switch should be pressed only when:

•an abnormal event occurs and all keys are disabled.

•you install or replace the batteries.

Notes:

•Pressing the RESET switch will clear the stored tax rate and other data stored in the memory.

•Use only a ballpoint pen to press the RESET switch. Do not use anything breakable or anything with a sharp tip, such as a needle.

•After pressing the RESET switch, press � to make sure that “0.” is indicated.

11