Wearing the S+D Sensor on your upper arm
•Please make sure that the belt clip is removed. To remove the belt clip, grasp clip and gently pop off. (Fig. 1) To replace clip line up tab on clip with slot on sensor and gently pop clip
on to unit. | Fig. 1 |
•If the armband is not attached,slide plastic attachment with elastic strap into the slot of the S+D Sensor as shown.(Fig. 2)
•Slide the elastic strap through the open end of the attachment, and fix it in place with the hook and loop closure.
•Slip the sensor and strap over your hand and onto your upper arm. Watch must be worn on same arm.(Fig. 3)
•Pull armband through the adjustable end so that it fits snugly around your arm.
Wearing the S+D Sensor on your belt
•If attached,remove armband by sliding out plastic attachment.
•Insert belt clip by lining up tab on belt clip with slot on Sensor and pop into place.
•Wear sensor on same side of body as watch.
Fig. 2 | Fig. 3 | |||
8 | 9 | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
