Starting the chronograph from zero for your next activity erases summary data from the previous activity, except the odometer information, which you must clear manually.
NOTE: To view information for each individual segment of your activity, refer to ÒLap Data ModeÓ on page 46.
TO OPERATE SUMMARY MODE
1.Press MODE until Summary Mode appears.
2.Press ▲ (DISPLAY) or ▼ (STOP/RESET) to navigate through summary data.
TO RESET FEATURES IN SUMMARY MODE
While viewing either the Odometer, Max Speed, or Best Pace values, press and hold START/SPLIT to reset the value to zero.
TO VIEW PERFORMANCE DATA IN SUMMARY MODE
With the exception of lap and split times, Summary Mode relies on the Fitness Sensors.
If you only use one Sensor, information for the other Sensor will appear blank if you have set the Watch to hide blank data. For information on data hiding, refer to ÒWatch settingsÓ on page 67.
Performance data viewing options for Summary Mode include data for the following six data groups:
50
Speed
ϖAverage Speed: Your average speed calculated by dividing distance by time.
ϖMaximum Speed: Your quickest speed.
ϖAverage Pace: Your average speed calculated as minutes per distance unit traveled.
ϖBest Pace: Your fastest time traveled per minute.
Distance
ϖEvent Distance: Your accumulated distance traveled during the activity while the chronograph was running.
ϖOdometer: Your accumulated distance traveled since you last manually reset the odometer. Since the odometer does not operate in conjunction with the chronograph, you can use this feature to track accumulated distance over several workouts.
Vertical
ϖTotal Ascent: Total ascent accumulates all positive altitude changes throughout your activity. If you run up and down a 200 foot hill 10 times, your total ascent is 2000 feet (200 feet times 10 trips).
ϖTotal Descent: Total descent accumulates all negative altitude changes throughout your activity. If you run up and down a 200 foot hill 10 times, your total descent is 2000 feet (200 feet times 10 trips).
51
