GPS-3D SENSOR SETTINGS
Smoothing: Smoothing is useful if you feel that the displayed speed or pace values appear to be too erratic. Smoothing applies an averaging filter and may cause the displayed speed or pace values to respond more slowly to changes.
Configure the following speed and distance settings:
ϖZone Type: Set the Watch to track your speed or your pace and to alert you if you move too slowly or too quickly (alert types include an audible alert that beeps or a silent alert that flashes).
Slowest pace | Fastest speed |
| Alert |
| Type |
Fastest pace | Slowest speed |
NOTE: You can set speed and pace limits independently. For instance, set pace limits to control pace for your run and set speed limits to values useful for cycling. Then simply switch between the settings for each activity.
ϖDistance Alert: Set the Watch to alert you for distance intervals. For example, you can set the Watch to alert you for every mile you travel. The distance alert will only function when the chronograph is running.
ϖSpeed Smoothing: Turn speed smoothing off or on.
ϖPace Smoothing: Turn pace smoothing off or on.
ALTITUDE SETTINGS
Smoothing: Smoothing is useful if you feel that the displayed altitude values appear to be too erratic. Smoothing applies an averaging filter and may cause the displayed altitude values to respond more slowly to changes.
Configure the following altitude settings:
ϖTarget Altitude: Set the target altitude to alert you when you move above a specified altitude. When you reach the target altitude, the Watch beeps and begins timing. If you move below the target altitude, the Watch suspends timing until you once again move above the target altitude.
ϖMax Altitude: Set the max altitude to alert you if you move above an altitude value you do not wish to exceed. If you exceed your altitude, the Watch will beep until you move below the maximum altitude.
ϖSmoothing: Turn altitude smoothing off or on.
ϖUpdate Ascent Rate: Set the Watch to update the period at which the ascent rate is calculated. You can choose intervals of 30 seconds, or one, 10, 30, or 60 minutes. Set this feature shorter for faster vertical activities such as skiing or longer for slower vertical activities such as climbing.
64 | 65 |
