Timex W-184 manual To Operate the Track Back Feature, Hold to Begin Track

ϖTo erase a waypoint, press and hold STOP/RESET .

If you erase a waypoint, it will not re-order the other waypoints. For instance, if you have labeled your waypoints WAYPNT 1, 2, and 3 and you erase WAYPNT 2 you will then have waypoints labeled WAYPNT 1 and 3.

TO OPERATE THE TRACK BACK FEATURE

	Recall a stored
	waypoint
Activate	Deactivate Track
Track Back	Back

You can activate the Track Back feature when you are ready to navigate from a current position to one of your stored waypoints. When activated, the Track Back feature takes over Waypoints Mode. You cannot perform any other functions until you deactivate Track Back.

1.Press ▲ (DISPLAY) to select the desired waypoint.

2.Press and hold START/SPLIT. You will see the message

HOLD TO BEGIN TRACK.

The Watch will display the current heading and bearing and the estimated distance from your current location to the selected waypoint.

3.Begin moving. The Watch will display your current location until your location aligns with your chosen waypoint.

The Watch calculates the distance between your current position and the chosen waypoint as a straight line. Depending on your heading and bearing, the distance may appear to increase as you move towards your desired waypoint.

4.Press and hold STOP/RESET to deactivate the Track Back feature once you reach your destination.

5.Repeat steps 1 through 4 to navigate to another stored waypoint. This allows you to retrace your path through a series of stored waypoints.

44 45