UV36 Vent-Free Firebox

Installation Instructions

Choosing the Location for Your Fireplace

Framing Clearances

Figure 2 shows some of the many ways your fireplace may be installed. Consider the traffic pattern in your room and the location of doors and windows. Moving air from ceiling fans, open doors and hot air grilles may cause the flames to soot. If a disturbance is found that affects the flames, it must be eliminated by turning off the ceiling fan, closing the door or closing/moving the hot air register. A corner location may be best where space is limited.

Your fireplace weighs no more than some of your fine furniture. If the fireplace is located near a load bear- ing wall, additional supports to the foundation will not be necessary. HEAVY FACINGS SUCH AS BRICK, STONE, ETC., MAY REQUIRE ADDITIONAL FOUNDA- TION SUPPORT.

ALTHOUGH THIS UNIT MAY BE INSTALLED ON COMBUSTIBLE SURFACES, IT MUST NOT BE IN- STALLED ON CARPET OR VINYL.

The clearances to sidewalls and ceiling that are shown in Figure 3 must be considered when choosing the location for the fireplace.

Room Divider

Partial Room

Projection

Full Room

Projection

Corner

Flush

T224

Fig. 2 Locating the fireplace.

Gas Line

The gas line must be installed by a licensed gas line installer before framing in the fireplace.

Drafts

Do not locate the fireplace in high traffic areas or areas exposed to high drafts and winds. Locate the fireplace away from furniture and draperies.

The fireplace may be placed directly on a combustible floor, against a combustible wall at marked clearances or on a raised wooden platform.

If the fireplace is to be installed on a raised wooden platform, the platform must be a continuous level sur- face.

The fireplace must be secured in place so it cannot shift positions. The nailing flanges on the sides of the firebox make securing it to the framing easy. They were designed to allow the installation of 1/2” wallboard or plywood flush with the face of the fireplace.

Only the header (Fig. 1) may rest on the standoffs on top of the firebox.

When the fireplace is installed over carpeting, vinyl tile or any combustible material other than wood flooring, it must be installed on a metal or wood panel extend- ing its full width and depth. Alternatively - the carpet- ing, vinyl tile, etc., may be removed from beneath the fireplace before installing.

COMBUSTIBLE MATERIALS MUST NOT BE IN- STALLED OVER OR TOUCH THE BLACK FRONT SURFACE OF THE FIREPLACE.

Clearances

To ensure a safe installation, the following instructions must be carefully observed.

1.Right and Left Sidewall Clearances: Clearances from the side of the fireplace opening to any com- bustible wall should not be less than 2”.

2.Ceiling Clearances: The ceiling height should not be less than 36” from the top of the fireplace open- ing.

3.Mantel and Wall Clearances:

A.Noncombustible materials must be used for all wall coverings below the top standoffs of the fireplace. (Fig. 3)

B.A combustible mantel may project 1” from the wall 12” above the fireplace opening.

C.A combustible mantel must fall within the profile that is shown in Figure 3.

4.Floor Clearances: No clearance is required if the appliance is installed per these instructions.

20007446

5

Page 4 Page 6
Page 5
Image 5
Majestic Appliances UV36 Installation Instructions, Choosing the Location for Your Fireplace Framing Clearances, Gas Line
Page 4 Page 6

UV36 specifications

The Majestic Appliances UV36 is set to redefine the standard of modern kitchen appliances, combining cutting-edge technology with exceptional design. This versatile unit is designed for those who value efficiency and style, making it a perfect addition to any home.

One of the standout features of the UV36 is its energy efficiency. Utilizing advanced energy-saving technologies, it operates with minimal power consumption, which not only helps the environment but also reduces your electricity bills. This appliance has been engineered to exceed energy standards, ensuring you can enjoy a high-performance experience without compromising on sustainability.

The UV36 boasts a powerful multi-function capability, allowing it to perform various cooking methods including steaming, baking, broiling, and even dehydrating. This versatility makes it an ideal solution for home chefs looking to experiment with different culinary techniques. The intuitive control panel includes pre-set cooking functions, allowing users to select the desired cooking method with ease, resulting in perfectly cooked meals every time.

Technology plays a crucial role in the UV36's design. It incorporates a state-of-the-art convection cooking system that circulates hot air around the food, ensuring even cooking and browning. The precise temperature control ensures that your dishes are cooked to perfection, whether you’re preparing a delicate soufflé or a hearty roast. The appliance also features a built-in timer function that takes the guesswork out of meal preparation.

Cleaning is made easy with the UV36, thanks to its non-stick interior surface. This feature not only simplifies the cleaning process but also enhances the appliance's longevity. With a removable drip tray, any spills or excess moisture is easily collected, making maintenance a breeze.

Safety is a top priority, and the UV36 includes several features designed to protect users. It comes equipped with an automatic shut-off function that activates when the cooking cycle is complete, preventing overheating and accidents. The exterior remains cool to the touch during operation, ensuring that you can handle the appliance safely.

In summary, the Majestic Appliances UV36 combines energy efficiency, multifunctionality, advanced cooking technology, and user-friendly features in a stylish package. It is perfect for culinary enthusiasts who seek to elevate their cooking experience while maintaining practicality and safety. The UV36 is more than just an appliance; it's an investment in a smarter, more efficient kitchen.
Top Page Image Contents