8 SET MODE
■Quick set mode items | ■Initial set mode items | |
|
|
|
DIMMER |
|
|
This item toggles the intensity of the display back- | HIGH | LOW |
lighting between high or low. | Bright backlighting | Dark backlighting. |
| (default). |
|
|
|
|
BEEP
A beep sounds each time a switch is pushed for con- firmation. This function can be turned OFF for silent operation.
ON | OFF |
Confirmation beeps | Confirmation beeps |
ON (default). | OFF. |
LOCK
This item sets the lock function to electronically lock the main dial only or both the main dial and the panel switches.
DIAL | PANEL |
Only the main dial | Both the main dial and panel |
can be locked (default). | switches can be locked. |
AUTO TS
This item sets the auto tuning speed. The main dial normally changes the frequency [400] ⋅ [tuning step]/ revolution. When auto tuning speed is turned on this increases to [2000] ⋅ [tuning step]/revolution during quick rotation of the dial.
ON | OFF |
The auto tuning speed | The auto tuning speed |
function is ON (default). | function is OFF. |
HF ANT
This item sets the active HF antenna connector on the rear panel. Either the 50 Ω
50
500
The
REC REMO
This item activates/deactivates the REC REMOTE | ON | OFF |
jack on the front panel. When ON is selected, the | The REC REMOTE jack | The REC REMOTE jack has |
[REC REMOTE] jack is at a “low” level when the | can be used (default). | no function and no relay |
squelch opens via the internal relay. |
| switching sound is heard. |
|
|
|
|
|
|
REC SPCH |
|
|
When the optional | ON | OFF |
installed and scan is in use, the detected frequency | The detected frequency is | The optional voice synthe- |
is announced each time scan pauses, regardless of | announced when scan | sizer activates via the |
the [SPCH/LOCK] switch. This announcement can | pauses (default). | [SPCH] switch only. |
be turned ON and OFF. |
|
|
|
|
|
31
