Icom IC-R8500 Optional Installations, UT-102 VOICE SYNTHESIZER UNIT, FL-52A CW NARROW FILTER

OPTIONAL INSTALLATIONS 12

■UT-102VOICE SYNTHESIZER UNIT

The UT-102 announces the accessed frequency in a clear, electronically generated voice, in English (or Japanese) when pushing [SPCH] or when a signal is detected during scan (see p. 31, 32 for settings).

Under the top cover

➀Remove the top cover as shown opposite.

➁Remove the protected paper attached to the bot- tom of the UT-102 to expose the adhesive strip.

➂Connect the UT-102 as shown in the diagram at right.

➃Replace the top cover.

UT-102

J12

■FL-52ACW NARROW FILTER

The IC-R8500 has a CW narrow mode which pro- vides better S/N (signal-to-noise) and also rejects nearby interference. The CW narrow filter is helpful

when receiving CW and radio-teletype signals.	Under the top cover
➀Remove the top cover as shown opposite.
➁Connect the FL-52A as shown in the diagram at
right.
• Make sure it is connected in the proper orientation.
• Attached nuts on the FL-52A are not necessary. If you
want to install the filter more securely, open the MAIN
unit, then use the nuts on the bottom of the MAIN unit.
➂Replace the top cover.

FL-52A