OPTIONAL INSTALLATIONS 12
■TV-R7100 TV RECEIVE ADAPTER
DConnections
Red to right* White to left Yellow to video
yellow white* red
[IF OUT] [AGC]
Antenna
*When the TV set has only one audio jack, connect the white cable only.
Red to right White to left Yellow: no connection
red from [IF IN]
black from | stereo | |
[TV CONTROL] | ||
headphones | ||
|
DOperation
➀Turn on the
➁Select WFM mode.
➂➥Push OUT [FM/TV] on the
➥Push IN [FM/TV] on the
➃Set the frequency of the audio center frequency of the desired TV or FM signals by the main dial or di- rect keypad entry.
•The FM center indicator on the
•Pictures appear on your TV screen and sound is emitted.
DTV-R7100 specifications
General
• Power supply requirement: 9 V negative ground
(supplied from the IC- R8500)
•Current drain: Approx. 100 mA (when receiving no sig- nal)
•Dimensions: 110(W) ⋅ 35(H) ⋅ 200(D) mm;
4.3(W) ⋅ 1.4(H) ⋅ 7.9(D) in
(projections not included)
•Weight: 750 g; 1.7 lb
•Headphone jack impedance: 32 Ω (approx.)
TV receiver
•Video carrier input frequency: 15.2 MHz (U.S.A. ver- sion)
16.2MHz (Europe ver-
sion)
•Audio carrier input frequency: 10.7 MHz
•Audio intermediate frequency: 4.5 MHz (U.S.A. version) 5.5 MHz (Europe version)
•Video output level: 1 V
•Audio output level: 300 mVrms/47 kΩ load (U.S.A. version) 400 mVrms/47 kΩ load (Europe version)
FM receiver
•Intermediate frequency: 10.7 MHz
•Selectivity: 230
•Audio output level: 300 mV/47 kΩ
•Stereo separation: More than 30 dB (1 kHz)
40