![■Automatic bank limit/skip functions](/images/new-backgrounds/98070/9807057x1.webp)
SCANS 6
■Automatic bank limit/skip functions
When starting a scan, the following functions are automatically turned ON by default; and the [SKIP] and [BANK] switches are deactivated during scan.
•The bank limit function (for memory scan and select memory
• Turning OFF the automatic function
•The skip function (for any scan except priority
➀Push [MEMO] for 1 sec.
•A display as at right appears.
➁Rotate the
BANK.
➂Rotate the main dial to select the function AUTO or MANU- AL.
➃Push [MEMO] to return to the previous display.
The skip function is turned ON automatical-
SKIP AUTO ly at scan start.
[SKIP] does not function during scan.
| The scan skip function is turned ON and |
SKIP MANUAL | OFF by [SKIP] regardless of scan start. |
The bank limit function is turned ON au-
BANK AUTO tomatically at scan start.
[BANK] does not function during scan.
BANK MANUAL | The bank limit function is turned ON and |
OFF by [BANK] regardless of scan start. |
■Voice scan control function
This function is useful when you don’t want unmodu- lated signals pausing or cancelling a scan. When activated, the receiver checks received signals for voice components.
If a receiver signal includes voice components, and the tone of the voice components changes within 1 sec., scan pauses (or stops). If the received signal includes no voice components or the tone of the voice components does not change within 1 sec., scan resumes.
To toggle the function ON and OFF, push [VSC].
• “VSC” appears while it is activated.
|
|
| VSC appears |
FM |
| VSC OFF DLY ∞ | |
|
|
| kHz |
ICOM- | |||
Unmodulated | Modulated | ||
signal | signal | ||
|
| Scan edge 2 | |
Scan edge 1 |
|
| |
|
|
|
|
• The VSC function activates for any scan. |
|
|
|
|
• The VSC function resumes the scan on unmod- |
|
|
|
|
ulated signals even when the resume condition is | Scan |
| Scan pauses or is | |
set to “OFF” or “∞ ”. |
| Skip | cancelled. |
26