Icom IC-R8500 Channel/bank names, D Channel name programming, D Bank name programming, 1 QZ

MEMORY CHANNELS 5

■Channel/bank names

Channel names of up to 8 characters and bank names of up to 5 characters can be programmed for conve- nience. Programmed names can be easily copied to other channels using the copy/paste function.

[CEs• NAME] key

DChannel name programming

➀Select the desired memory channel.

➁Set the frequency (and mode/tuning steps), then push and hold the [MW] key.

•When no data is programmed, “BLANK” appears and memory names cannot be programmed.

➂Push [CEs • NAME].

•A cursor appears at the first character space of the name area.

➃Enter the desired name via the keypad.

•Push the appropriate keys to input the desired charac- ters.

•To erase a character, overwrite with a ‘space’ using the

[M-CH• ] key.

•To move the cursor forwards or backwards, use the [•t] or [CEs] key.

➄Push [ENT] to input the set name.

USR-A

CE

NAME

USR-A

1 QZ

to

9 WXY

USR-A MEMONAME

BANK

ENT

ENT

USR-A MEMONAME

DBank name programming

➀Select the desired bank using [M-CH• BANK▲] or [ENT • BANK▼].

➁Push [CEs • NAME].

•A cursor appears at the first character space of the name area.

•When no data is programmed, (“BLANK” appears) the cursor does not appear. Program a frequency or change the channel in such cases.

➂Push [•t] to move the cursor to the bank name area.

➃Enter the desired name via the keypad.

•Use the same method as for channel names (see above).

➄Push [ENT] to input the set name.

NOTE: When using [CEs] on the last digit of the bank name, the current name is cleared and the previous one is substituted. DO NOT forget to push [ENT] after the bank name is set.

USR-A	MEMONAME
		CE
		NAME
USR-A	MEMONAME	.
		5 times
USR-A	MEMONAME	1 QZ
		to
		9 WXY
BANKN	MEMONAME
		BANK

ENT

ENT

BANKN MEMONAME

20