54
LSQT1161
Recording
2Move the switch down and set it

to FOCUS position.

The manual focus indication [MF] and the icon
shown in the illustration appear.
3Move the joystick left or right to

bring the subject into focus.

The subject may not be in focus when zoomed
in if focusing with a wide angle. First, zoom in
on the subject, and then focus on it.
To restore to the automatic adjustment
Press the AUTO/MANUAL/FOCUS switch down
again to the FOCUS position.
You can also restore the auto focusing by
setting the AUTO/MANUAL/FOCUS switch to
AUTO.
(RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD)
The automatic white balance function may not
reproduce natural colours depending on the
scenes or lighting conditions. If so, you can
adjust the white balance manually.
¬Rotate the mode dial to select or
.
1Set the AUTO/MANUAL/FOCUS
switch to MANUAL.
The icon shown in the illustration is displayed
automatically.
2Move the joystick up to select
[].
3Move the joystick left or right to

select the white balance mode.

To restore to the automatic adjustment
Set the white balance mode to [ ].
You can also restore the automatic adjustment
by setting the AUTO/MANUAL/FOCUS switch
to AUTO.

White balance

This is for recording in natural
colours.
MNL
4/4
4/4
NEXT
NEXT
4/4
NEXT
MNL
4/4
4/4
NEXT
NEXT
4/4
NEXT
[]
Auto white balance adjustment
[]
Indoor mode (for recording under
incandescent lamps)
Incandescent lights, halogen lamps
[]
Outdoor mode
Outdoors under a clear sky
[]
Manual adjustment mode
Mercury-vapor lamps, sodium lamps,
some fluorescent lights
Lights used for wedding receptions at
hotels, stage spotlights in theatres
Sunrise, sunset, etc.
MNL
3/3
3/3
NEXT
NEXT
3/3
NEXT
MNL
3/3
3/3
NEXT
NEXT
3/3
NEXT
MNL
BACK
BACK
BACK
AWB
AWB
LSQT1161_GN.book 54 ページ 2007年1月19日 金曜日 午後1時8分